Delivering Excellence With Every Machine

M/S Technovate Inc. is a professionally managed reputed organization, engaged in the manufacturing and trading of superlative garage tool and machines. Reckoned as prominent Garage tools Manufacturer in India, our company has introduced various easy to use machines that can suit the needs of the clients. With our technical expertise and team of adroit professionals, we have marked our specialization in the global market. We aspire to become the leading Garage tools Fuel Injector Cleaning Machine, Ultrasonic Cleaning Machine and Fuel Average Testing Machine Manufacturer and thus, strive hard to come with nothing but the best.

Featured Products

  • 0 out of 5

    Reciprocating Air Compressor Manufacturers- Ds Series

    Special design with lightweight piston results in lesser inertia forces which increase power savings. With least valve losses these reciprocating air compressors provide long service life. Frank Compressor is the one-stop source for all the reciprocating air compressor needs with high efficiency. With a proven design and stellar track record, these reciprocating air compressors have earned worldwide recognition for reliable, trustworthy performance that saves money and enhances business value.

    • Features

    * Cylinders are with deep radical fins on outer side for quick heat dissipation.

    * Finger valves, concentric disc valves, plates & springs are quickly acting for better performance.

    * Forged steel connecting rod with needle bearing for heavy duty operation.

    * Crankshaft with double end ball bearings for long life service intervals.

    * Less noise level and ease of maintenance.

    * Low specific power consumption.

  • 0 out of 5

    Under Chassis Washer 45 Seconds

    SALIENT FEATURES
    The line voltage to the sensor is 24 DC volts.
    Emergency Push Button is provided in case of any Emergency stop.
    Mechanical stoppers have been provided in the rails for safety purpose.
    UCW reduces Time, Man power and Cost.
    Car is placed stationary and cleaning is done through a moving trolley fitted with 7 nos
    of Stainless Steel HT nozzles.
    Water is boosted by a high pressure vertical multi stage pump.
    All materials exposed to water are made of Stainless Steel (SS 304).
    Electronic sensors are provided for sensing the car length.
    Two numbers of 6 mts hoses are provided for wheel arch cleaning.

     

    TECHNICAL SPECIFICATION
    Pit dimensions (LxWxH):   5500 x 850 x 325 mm
    No of nozzles:   7 nos
    Input supply:   3 Ph, 415 v, 50 Hz
    Connected Load:   8 Hp
    Power consumption per car:   0.05 units
    Time consuming for one cycle:   40 sec (Excluding wheel arch cleaning)
    Water consumption per car:   45 – 55 litres (Depends on car length)
    Operating pressure:   24 bar

  • 0 out of 5

    Touchless Wash 3.5 Minutes

    SALIENT FEATURES
    The line voltage to the sensor is 24 DC volts.
    Emergency Push Button is provided in case of any Emergency stop.
    Soft Natural Rubber guards are provided on the moving arms for vehicle safety.
    TCW reduces Time, Man power and Cost.
    Car is placed stationary and cleaning is done by 14 jet nozzles for body wash & 14 jet
    nozzles for shampoo.
    Control Panel has Automatic as well as Manual mode.
    The ULTRASONIC SENSORS are provided for Automatically Sensing the car length.
    All materials exposed to water are made of Stainless Steel (SS 304).
    Torque limiter controls the equipment if any obstruction.
    The Washing system is controlled by PROGRAMABLE LOGIC CIRCUITS (PLC).

     

    TECHNICAL SPECIFICATION
    Required space (LxWxH):   6700 x 4250 x 3700 mm
    Overall dimensions (LxWxH):   5500 x 3950 x 3080 mm
    Max.washable dimension of cars:   4750 x 1900 x 1900 mm
    Input supply:   3Ph, 415v, 50 Hz
    Connected Load:   9 HP
    Power consumption per car:   0.6 units
    Water consumption per car:   110 litres
    Shampoo consumption per car:    7 ml /car (Recommended dilution – 1:700)
    Operating pressure:   22 bar

  • 0 out of 5

    Vacuum Cleaner Wet & Dry (V-80)

    Vacuum Cleaner Wet & Dry (V-80) Motor made in ITALY Technical Specs.
    Number Motors 3
    Stage Double
    Volt (V) 220-240
    frequency 50-60
    Mode of cooling Circulating air cooling
    Power 3000 W
    Vacuum Suction Length 280 mbar
    Air Flow (m3/h) 120 L/S
    Hose diameter Dia40mm
    Total Tank Capacity 80 Liters
    Tank diameter Dia.440 mm
    Length of the cable 8m
    Height 90 cm
  • 0 out of 5

    Vacuum Cleaner Wet & Dry (V-60)

    Vacuum Cleaner Wet & Dry  (V-60) Motor made in ITALY Technical Specs.
    Number Motors 2
    Stage Double
    Volt (V) 220-240
    frequency 50-60
    Mode of cooling Circulating air cooling
    Power 2000W
    Vacuum Suction Length 250 mbar
    Air Flow (m3/h) 106 L/S
    Hose diameter Dia40mm
    Total Tank Capacity 60 Liters
    Tank diameter Dia.440 mm
    Length of the cable 8m
    Height 90 cm
  • 0 out of 5

    Wet & Dry Vacuum Cleaner (V-30 )

    Wet & Dry Vacuum Cleaner (V-30 ) Motor made in ITALY Ideal for professional cleaning

    Technical Specs.
    Number Motors 1
    Stage Double
    Volt (V) 220-240
    frequency 50-60
    Mode of cooling Circulating air cooling
    Power 1000W
    Vacuum Suction Length 230 mbar
    Air Flow (m3/h) 53 L/S
    Hose diameter Dia30mm
    Total Tank Capacity 30 Liters
    Tank diameter Dia.345mm
    Length of the cable 7m
    Height 76 cm
  • 0 out of 5

    Dry Vacuum Cleaner (V-15)

    Dry Vacuum Cleaner (V-15) Motor made in ITALY Ideal for professional cleaning

    Technical Specs.
    Number Motors 1
    Stage Single
    Volt (V) 220-240
    frequency 50-60
    Mode of cooling By Pass
    Power 1000W
    Vacuum Water Lift   1800mm H2O
    Air Flow (m3/h) 48 L/S
    Hose diameter Dia30mm
    Total Tank Capacity 15 Liters
    Tank diameter Dia.345mm
    Length of the cable 7.2m
    Weight 9kg
    Height 55 cm
  • 0 out of 5

    Under Hoist Stand

    FEATURES

    Perfect for holding drive-train or exhaust components in position

    Stabilizes vehicles that are raised on lifts

    Heavy-steel construction for maximum durability

    Height range 1435mm – 2000mm

    Quick adjust spin handle with thrust bearing

    Adjustable Hub Arm with saddle screw for load positioning

    Reversible Hub Arm with sanddle.

    Wide base provides maximum stability

    Height range 1150mm – 2180mm

    Ideal for all under hoist work including exhaust systems, suspension, fuel tank etc.

  • 0 out of 5

    Bumper Rack Double Side – 2 Level

    FEATURES

    Double-sided rack for safe and tidy workshop storage of painted bumpers.
    Prevents inadvertent damage to paint finish during storage.
    Holds up to 4 large bumpers
    The arms are height adjustable
    Steel with powder coated
    2 pair 400mm arms + 2 pair 600mm arms(with EPE foam cover)
    4 x 4inch castors(Two Swivel With Brake)
  • 0 out of 5

    Four Wheel Storage Caddie – Foldable

    FEATURES

    Storage systems for the tidy, organised work shop & Express bay.
    Powder coated steel bar.
    Accommodates up to 12 – 15″ maximum.
    Wheel storage trolley for4 wheels.
    Complete with metal tray for wheel nuts tools etc.
    Foldable space saving
    6 castors two with brakes

  • 0 out of 5

    Windshield Rack – 10 Level

    FEATURES

    Holds 10 windshields
    Extensive rubber and foam padding – no metal-on-glass contact
    8° pitchback for easy loading and unloading
    Heavy gauge steel construction
    Durable powder coat finish
    W 805 x D 1145 x H 1275mm
  • 0 out of 5

    Double Wheel Storage Caddie

    FEATURES

    Storage systems for the tidy, organised work shop & Express bay.
    Powder coated steel bar.
    Accommodates up to 12 – 15″ maximum.
    Wheel storage trolley for2 wheels.
    Complete with metal tray for wheel nuts.
    2 castors two with brakes.