Hand Operated Grease Pumps
Technical Specification for Hand Operated Grease Pumps
|
S. No.
|
Parameter
|
HGP 20
|
|
1
|
Working Media
|
Grease
|
|
2
|
Container Capacity -Kgs
|
20
|
|
3
|
Type
|
Portable with trolley
|
|
4
|
Output(Gms/Stroke)
|
5
|
|
5
|
Hose type
|
1/4″-100 R2
|
|
6
|
Hose length (mts)
|
2.2
|
Related Products
-
Pneumatic Oil Pumps
Technical Specification for Pneumatic Oil PumpsS. No.ParameterHGP 051Working MediaGrease2Container Capacity -Kgs53TypePortable with Trolley4Output(Gms/Stroke)55Hose type1/4″-100 R26Hose length (mts)2.2 -
Pneumatic Grease Pumps
Technical Specification for Pneumatic Grease PumpsS. No.ParameterModel PGP 251Min. air pressure required4.5kg/cm22Container Capacity -Kgs25 kgs3Working Ratio1 : 504Output(Gms/Stroke)4505Hose type1/4″-100 R26Hose length (mts)2.2 -
High Pressure Trolley Mount Car Washer Pump
Technical Specification
Specification 3 hp 3 hp 5 hp 7.5 hp 10 hp 20 hp Phase Single Three Three Three Three Three Voltage 120-230V 415V 415V 415V 415V 415V Output(l/min) 12 ltr. 12 ltr. 13 ltr. 15 ltr. 20 ltr. 21 ltr. Pressure(Bar) 140 140 170 200 200 350 RPM 1450 1450 1450 1450 1450 1450 Actual Weight(KG) 40 40 45 70 90 190 Starter Dual Dual Dual Dual Dual Delta Body Cover SS/MS SS/MS SS/MS SS/MS SS/MS SS/MS Stand Type Trolley Trolley Trolley Trolley Trolley Trolley -
Steam Car Washer
Steam Booster System produces nothing but steam which directly implies that it uses less water. It can clean a car using just 2 litres(approx.) of water, whereas a conventional power washing system uses close to 100 litres. Our steam car washer allows every area of the vehicle to be cleaned to a biological and forensic standard without leaving behind any waste, water, foam or chemicals. No additional equipment or disposal facility is needed for this product.
Technical Specification ET-26SW
Weight: 100 KG
Hose Length: 10 Mts
Water Tank Capacity: 26 litres
Wax Tank Capacity: 10 Litres
Diesel Fuel Capacity: 10L
Electric Power Rate: 110-220V
Washing LXWXH: 21.3 x 35.6m x 29.5 Metres
Electric Power Consumption: 200W
Steam Generator: Diesel Fires Coil Technology
Steam Temperature: 80-90C(170-203F)
Preheating Time: Below 1 minute
Water Consumption: 600-1200cc/min(users can adjust)
Material: Stainless Steel
Automatic Wax Mixing Device: ON/OFF Function with time control
-
Under Chassis Washer 45 Seconds
SALIENT FEATURES
The line voltage to the sensor is 24 DC volts.
Emergency Push Button is provided in case of any Emergency stop.
Mechanical stoppers have been provided in the rails for safety purpose.
UCW reduces Time, Man power and Cost.
Car is placed stationary and cleaning is done through a moving trolley fitted with 7 nos
of Stainless Steel HT nozzles.
Water is boosted by a high pressure vertical multi stage pump.
All materials exposed to water are made of Stainless Steel (SS 304).
Electronic sensors are provided for sensing the car length.
Two numbers of 6 mts hoses are provided for wheel arch cleaning.TECHNICAL SPECIFICATION
Pit dimensions (LxWxH): 5500 x 850 x 325 mm
No of nozzles: 7 nos
Input supply: 3 Ph, 415 v, 50 Hz
Connected Load: 8 Hp
Power consumption per car: 0.05 units
Time consuming for one cycle: 40 sec (Excluding wheel arch cleaning)
Water consumption per car: 45 – 55 litres (Depends on car length)
Operating pressure: 24 bar -
High Pressure Vehicle Washer Triple Plungers
Technical Specification for High Pressure Vehicle Washer – Triple PlungersS. No.ParameterModelVW 01 / 22 / 3 VW 03 / 45 / 3VW 03 / 35 / 31Output per gun (LPM)11 1582Working pressure ( Kg/sq.cm)22 45353No. of hose & gun1 124No. of plungers3 335Motor H.P.1 336RPM450 350350
Reviews
There are no reviews yet.