image

Vacuum Cleaner Wet & Dry (V-60)

Vacuum Cleaner Wet & Dry  (V-60) Motor made in ITALY Technical Specs.
Number Motors 2
Stage Double
Volt (V) 220-240
frequency 50-60
Mode of cooling Circulating air cooling
Power 2000W
Vacuum Suction Length 250 mbar
Air Flow (m3/h) 106 L/S
Hose diameter Dia40mm
Total Tank Capacity 60 Liters
Tank diameter Dia.440 mm
Length of the cable 8m
Height 90 cm
Categories: ,

Reviews

There are no reviews yet.

Be the first to review “Vacuum Cleaner Wet & Dry (V-60)”

Your email address will not be published. Required fields are marked *

Related Products

  • 0 out of 5

    Vacuum Cleaner Wet & Dry (V-80)

    Vacuum Cleaner Wet & Dry (V-80) Motor made in ITALY Technical Specs.
    Number Motors 3
    Stage Double
    Volt (V) 220-240
    frequency 50-60
    Mode of cooling Circulating air cooling
    Power 3000 W
    Vacuum Suction Length 280 mbar
    Air Flow (m3/h) 120 L/S
    Hose diameter Dia40mm
    Total Tank Capacity 80 Liters
    Tank diameter Dia.440 mm
    Length of the cable 8m
    Height 90 cm
    VIEW
  • 0 out of 5

    Air Operated Lubricating Pumps

    Technical Specification for Air Operated Lubricating Pumps
    S. No.
    Parameter
    HGP 10
    1
    Working Media
    Grease
    2
    Container Capacity -Kgs
    10
    3
    Type
    Portable with trolley
    4
    Output(Gms/Stroke)
    5
    5
    Hose type
    1/4″-100 R2
    6
    Hose length (mts)
    2.2
    VIEW
  • 0 out of 5

    Steam Car Washer

    Steam Booster System produces nothing but steam which directly implies that it uses less water. It can clean a car using just 2 litres(approx.) of water, whereas a conventional power washing system uses close to 100 litres. Our steam car washer allows every area of the vehicle to be cleaned to a biological and forensic standard without leaving behind any waste, water, foam or chemicals. No additional equipment or disposal facility is needed for this product.

    Technical Specification ET-26SW

    Weight:  100 KG
    Hose Length:  10 Mts
    Water Tank Capacity:  26 litres
    Wax Tank Capacity:  10 Litres
    Diesel Fuel Capacity:  10L
    Electric Power Rate:  110-220V
    Washing LXWXH:  21.3 x 35.6m x 29.5 Metres
    Electric Power Consumption:  200W
    Steam Generator:  Diesel Fires Coil Technology
    Steam Temperature:  80-90C(170-203F)
    Preheating Time:  Below 1 minute
    Water Consumption:  600-1200cc/min(users can adjust)
    Material:  Stainless Steel
    Automatic Wax Mixing Device:  ON/OFF Function with time control
    VIEW
  • 0 out of 5

    High Pressure Vehicle Washer Single Plunger

    Technical Specification for Vehicle Washer – Single Plunger 
    S. No.
    Parameter
    Model
    VW 03 / 22 / 1
    VW 02 / 22 / 1
    1
    Output per gun (LPM)
    13.5
    12.0
    2
    Working pressure ( Kg/sq.cm)
    22
    22
    3
    No. of hose & gun
    2
    1
    4
    No. of plunger
    1
    1
    5
    Motor H.P.
    3
    2
    6
    RPM
    350
    300
    VIEW
  • 0 out of 5

    Touchless Wash 3.5 Minutes

    SALIENT FEATURES
    The line voltage to the sensor is 24 DC volts.
    Emergency Push Button is provided in case of any Emergency stop.
    Soft Natural Rubber guards are provided on the moving arms for vehicle safety.
    TCW reduces Time, Man power and Cost.
    Car is placed stationary and cleaning is done by 14 jet nozzles for body wash & 14 jet
    nozzles for shampoo.
    Control Panel has Automatic as well as Manual mode.
    The ULTRASONIC SENSORS are provided for Automatically Sensing the car length.
    All materials exposed to water are made of Stainless Steel (SS 304).
    Torque limiter controls the equipment if any obstruction.
    The Washing system is controlled by PROGRAMABLE LOGIC CIRCUITS (PLC).

     

    TECHNICAL SPECIFICATION
    Required space (LxWxH):   6700 x 4250 x 3700 mm
    Overall dimensions (LxWxH):   5500 x 3950 x 3080 mm
    Max.washable dimension of cars:   4750 x 1900 x 1900 mm
    Input supply:   3Ph, 415v, 50 Hz
    Connected Load:   9 HP
    Power consumption per car:   0.6 units
    Water consumption per car:   110 litres
    Shampoo consumption per car:    7 ml /car (Recommended dilution – 1:700)
    Operating pressure:   22 bar

    VIEW
  • 0 out of 5

    Pneumatic Oil Pumps

    Technical Specification for Pneumatic Oil Pumps 
    S. No.
    Parameter
    HGP 05
    1
    Working Media
    Grease
    2
    Container Capacity -Kgs
    5
    3
    Type
    Portable with Trolley
    4
    Output(Gms/Stroke)
    5
    5
    Hose type
    1/4″-100 R2
    6
    Hose length (mts)
    2.2
    VIEW